Service Area · Tamarac, FL

Impact Windows Installation in Tamarac, FL (2026)

SafeGuard is a Florida-licensed Certified General Contractor (CGC1532033) installing hurricane impact windows and impact-resistant doors across Tamarac. 160 Tamarac window-and-door projects completed across 3 local ZIP codes — sealed plans, Miami-Dade NOA verification, HOA coordination, and full inspection close-out handled by in-house crews.

Last updated May 2026Reviewed by Aldo Dellamano, FL CGC1532033

Call (954) 408-4000or fill out the form for a free Tamarac estimate

160
Tamarac window & door projects
Through latest quarterly refresh
3
Local ZIP codes served
Within Tamarac
300
Windows installed
Across all Tamarac jobs
5.2/mo
Recent project velocity
Trailing 6-month average

Source: JobNimbus API + MarketSharp historical export · refreshed 2026-08-18 · per-city totals rounded to publication threshold ≥ 5.

Installs in Tamarac

160+ Tamarac homes already installed by Safeguard

Every pin is a real Tamarac impact window or door install. Click a pin for the project type and year. Pin locations are approximate (anonymized within ~1/8 mile of the address).

Installation map

At a Glance

Tamarac Impact Window Installation — Key Facts

Service area: Tamarac, FL — entire city + adjacent Broward County
Also called: Hurricane windows · Hurricane-impact windows · Impact-resistant windows · Hurricane-proof windows
License: FL CGC1532033 (General Contractor)
Plus CCC1336241 (Roofing), CFC1434398 (Plumbing), CMC1251666 (Mechanical)
Product approval: Miami-Dade NOA required (HVHZ standard)
Permit issuer: City of Tamarac Building Division + Broward County
Manufacturers we install: PGT WinGuard · CGI · ES Windows · Custom Window Systems · Eco Window Systems
Average project size: 2 windows + 0 doors per Tamarac project
Median project value: ~$15,000 (160 Tamarac datapoints)
HOA-coordinated projects: 65% of Tamarac jobs include HOA approval coordination
Permit pathway: Sealed plans, Miami-Dade NOA verification, Notice of Commencement, both inspections — handled end-to-end

Permit Pathway

Pulling a Tamarac permit yourself? Read our Broward County impact-window permit guide before you submit — application steps, current review windows, and the four reasons most submissions get rejected.

Across the County

Tamarac is one of dozens of communities we serve. See the full Broward County impact window installation hub for county-wide installation counts, code requirements, and every neighboring city we install in.

Cost & Pricing

Trying to budget for your Tamarac project? See how much impact windows cost in Florida — 2026 per-window and whole-home ranges, per-square-foot benchmarks, financing routes, and the MSFH grant math laid out end to end.

TL;DR

SafeGuard installs hurricane-rated impact windows and doors across Tamarac, FL — Florida-licensed (CGC1532033), verified projects in 3 local ZIP codes, and 300 windows installed in this city alone. Average Tamarac install: 2 windows + 0 doors.

Tamarac is one of SafeGuard's active service cities — 160 window-and-door projects across 3 ZIP codes, with current velocity around 5.2 new Tamarac projects per month. Because Tamarac sits in Broward County, inside Florida's High Velocity Hurricane Zone, the product-approval pathway here is Miami-Dade Notice of Acceptance (NOA) — every product on the application carries its own current NOA number. This page covers what we install, the Tamarac-specific permit pathway, recent verified projects in town, and the questions homeowners ask before committing.

Why Tamarac Homeowners Choose SafeGuard

Answer

SafeGuard is the only Tamarac contractor that bundles four FL DBPR licenses (general, roofing, plumbing, mechanical) under a single in-house team — projects that touch multiple trades never go to a sub.

Most Tamarac hurricane window and impact window quotes you'll receive are from companies with a single CGC license that subcontract anything else. (Florida homeowners often search for these products as hurricane windows, hurricane impact windows, impact-resistant windows, or hurricane-proof windows — all describe the same HVHZ-rated, laminated, large-missile-tested glazing units we install.) SafeGuard's owner-of-record Aldo Dellamano holds four active FL DBPR credentials — General, Roofing, Plumbing, and Mechanical — and every Tamarac project is staffed by in-house crews working under those licenses. That matters when an install reveals rotten framing, a stucco crack, or a flashing detail that needs correcting at the same visit.

We pull the Tamarac permit under our license, recover any reviewer comments same-day, and stay the responsible party through final inspection. No sub-contracted permit pulling, no warranty hand-offs.

Tamarac Install Numbers

Answer

160 window-and-door projects completed in Tamarac, 300 total windows installed, 80 doors installed, and 49 consecutive months of active work in this city.

300
Windows installed
Across 160 Tamarac jobs
80
Doors installed
Including sliders + entry
40
Window/door projects (last 12 mo)
Active velocity
49 mo
Consecutive months working in Tamarac
Continuous service

Numbers reflect anonymized ops records — JobNimbus + MarketSharp pulls, refreshed quarterly. Project values are rounded to $5K bands and ZIP-only addresses are used in any case-study disclosure on this page. We never publish street-level addresses or homeowner names.

Tamarac Permit & Code — HVHZ Requirements

Answer

Tamarac sits in Broward County, inside Florida's High-Velocity Hurricane Zone. Every install requires Miami-Dade NOA-rated products, large-missile impact testing, and design wind speeds up to 170-175 mph — stricter than anywhere outside Miami-Dade and Broward.

Contractors licensed in non-HVHZ Florida regularly get tripped up by the HVHZ delta. Statewide Florida Product Approval is not equivalent. Large-missile impact testing — a 9-pound 2x4 fired at 34 mph at the glass — is the HVHZ acceptance threshold, and the design wind speed reaches 170-175 mph in parts of Broward County. Outside HVHZ, small-missile testing and 130-150 mph design speeds are typical.

	Tamarac (HVHZ)	Rest of Florida (non-HVHZ)
Product approval	Miami-Dade NOA required	Florida Product Approval accepted
Impact test	Large-missile (9 lb 2x4 @ 34 mph)	Small-missile in some zones
Design wind speed	Up to 170-175 mph	Typically 130-150 mph
Inspection rigor	Multiple inspections (rough + final)	Often a single final inspection
Notice of Commencement	Required >$2,500	Required >$2,500

Manufacturers We Install in Tamarac

Answer

SafeGuard is an authorized dealer for PGT WinGuard, CGI, ES Windows by Tecnoglass, Custom Window Systems (CWS), and Eco Window Systems — five tier-1 hurricane-impact lines. We pick per-project based on the home's design pressure, glass-area needs, and budget — never push one brand.

PGT WinGuard
Most-installed line for Tamarac owner-occupied homes. Aluminum or vinyl frames, 3M+ units installed nationwide with zero reported impact failures. PGT details →
CGI
South Florida-engineered impact line under MITER Brands. Sparta aluminum is the active value-tier product — strong fit for whole-home replacements where slim sightlines matter. CGI details →
ES Windows by Tecnoglass
Premium architectural aluminum from a vertically-integrated NYSE-listed manufacturer (TGLS). Elite + Prestige + Multimax lines. Right call for luxury custom builds with large openings. ES Windows details →
Custom Window Systems (CWS)
Florida-built since 1986, now a Pella brand. Vinyl or aluminum, in-state lead times — fast replacement-part service when needed. CWS details →
Eco Window Systems
Locally manufactured in Medley, FL since 2008. Miami-Dade NOA across the line; competitive value-tier price for whole-home replacements. Eco Windows details →

Tamarac ZIP Codes We've Worked In

Project counts per ZIP, current through the most recent quarterly refresh. Lower-count ZIPs are suppressed below the publication threshold.

ZIP code	Projects completed
33321	157
33319	35

FAQs

Tamarac Impact Window Installation — Common Questions

Do impact windows in Tamarac need a Miami-Dade NOA?

Yes. Tamarac sits in Broward County, inside Florida's HVHZ — every product on a building permit must carry a current Miami-Dade Notice of Acceptance. Statewide Florida Product Approval alone is not enough for an install in Tamarac.

How long does the permit take in Tamarac?

City of Tamarac Building Division reviews typically run 3 to 6 weeks for residential window-replacement permits, longer for full-home or commercial scopes. SafeGuard tracks every submission and re-submits same-day on any reviewer comments to avoid losing queue position.

Will my Tamarac HOA require approval before installation?

Most Tamarac HOAs require an architectural-review packet before window replacement starts — about 65% of our Tamarac projects involve formal HOA coordination. We submit the city permit and the HOA packet in parallel so the two timelines stack instead of run sequentially.

What's the typical Tamarac impact window installation cost?

Median project value for our Tamarac window/door installs lands around $15,000, with the IQR running from roughly $15K to $50K depending on opening count, glass package, and frame material. HVHZ-rated impact glass adds a real but bounded premium over non-impact products.

Do impact windows qualify me for an insurance discount in Tamarac?

Yes. Properly permitted and inspected impact-window installations qualify for the Florida wind-mitigation discount on every standard FL homeowners-insurance policy. The discount typically offsets a meaningful share of the install cost over the years you own the home.

Are you licensed and insured to work in Tamarac?

Yes — SafeGuard's owner-of-record holds Florida DBPR licenses CGC1532033 (General Contractor) and CCC1336241 (Roofing), among others. Verify any of them at [myfloridalicense.com](https://www.myfloridalicense.com/wl11.asp). General-liability and worker's-compensation insurance certificates are sent before work begins.

Do you handle the permit and inspections, or do I?

We handle the entire Tamarac permit pathway end-to-end: signed/sealed plans, Miami-Dade NOA verification per opening, Notice of Commencement filing for projects over $2,500, e-Permitting submission, reviewer-comment turnaround, and both inspections (rough/dry-in + final). You don't talk to the building department.

Can you replace just one or two windows, or only whole-home jobs?

Both. About a third of our Tamarac projects are partial replacements — typically 2 to 6 openings driven by leak repair, sliding-door upgrades, or single-room storm-protection. Whole-home replacements are still the most common, but we don't have a minimum opening count.

Ready to upgrade your Tamarac home?

Free estimate that includes the full permit pathway — sealed plans, product-approval verification, Notice of Commencement, and inspections.

Request a free estimate (954) 408-4000